I have a new Toyota Camry, so am spoiled by CarPlay. I recently bought a 2003 CRV and bought this as a possible cheap way to get CarPlay on it. Installation is simple. See below. This works almost as good as my factory CarPlay in my Camry. I’m using the Bluetooth connection to my iPhone.1. Remove 2 Phillips screws under the vent bezel.2. Pull the bottom of the bezel towards you. It’s in there tightly. Use the provided plastic pry tool. Once the bottom is out, pull on the top part.3. Remove the connector for the hazard switch . Bezel can be fully removed.4. You will need to remove the clips on the old bezel with a small flat tip or pry tool. There are like 6. Remove the 6 or so screws holding the vents on the old bezel.5. The radio is held in by 4 bolts. Remove those and the connector on back of the radio. Antenna wire also comes off.6. I did not use the camera or harness for that. I did leave the small harness for the camera connected as the pamphlet says it acts as a Bluetooth antenna.7. I did not connect the 2 USB cables as I am using Bluetooth.8. Once you bolt the vents on the radio and push in the hazard switch, you can install the 6 clips on the tabs.9. Connect the hazard switch and the main radio cable along with the antenna to the radio.10. Push the new radio and bezel in place and reinstall the 2 bottom mount screws.This thing works pretty well. I connected my phone to the Bluetooth and the CarPlay screen popped up. I did not use the supplied microphone cable either. Made a call on it and my buddy said I sounded normal. Google maps comes up along with my Pandora and Audible app.The sound quality actually is clear and impressive for what it is. Some reviews for similar units say that Android’s have issues but on iPhones this thing rocks. The controls on the radio bezel actually light up with the headlights on.I’m an electronics tech and former mechanic. This is an easy install. Took me 15 minutes, and that was at night with the car running using a dome lamp.Music sounds like a factory radio, as good as my Camry. I’m an audiophile and can be picky, but I’m impressed.My only complaints would be :They give you too much extra stuff, the wiring for using external USB, the camera, microphone, etc. you really only need the basic stuff.No real included instructions for installing. I’m remedying that here because I honestly think this is a bargain for what you get.It is slightly slower than my factory CarPlay unit, but I’m being picky.You will need a # 2 Phillips screwdriver and a small pocket flat blade to remove the clips.Buy this if you’re on the fence. Btw, I have owned several Alpine CarPlay units and this work better than 400.00 units plus its plug and play.